 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TPC6110 TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS) TPC6110 Power Management Switch Applications Unit: mm * * * * Small footprint due to small and thin package Low drain-source ON resistance: RDS (ON) = 43 m (typ.) Low leakage current: IDSS = -10 A (max) (VDS = -30 V) Enhancement mode: Vth = -0.8 to -2.0 V (VDS = -10 V, ID = -0.1mA) Absolute Maximum Ratings (Ta = 25C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) (t = 5 s) (Note 2a) (t = 5 s) (Note 2b) Symbol VDSS VDGR VGSS ID IDP PD PD EAS IAR (Note 4) EAR Tch Tstg Rating -30 -30 -25/+20 -4.5 -18 2.2 0.7 3.4 -2.3 0.025 150 -55 to 150 Unit V V V A Drain power dissipation Drain power dissipation JEDEC W W mJ A mJ C C 2-3T1A JEITA TOSHIBA Single pulse avalanche energy (Note 3) Avalanche current Repetitive avalanche energy Channel temperature Storage temperature range Weight: 0.011 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Thermal resistance, channel to ambient (t = 5 s) (Note 2a) Thermal resistance, channel to ambient (t = 5 s) (Note 2b) Symbol Rth (ch-a) Rth (ch-a) Max 56.8 178.5 Unit C/W C/W Circuit Configuration 6 5 4 Note: (Note 1), (Note 2), (Note 3), (Note 4) and (Note 5): See other pages. This transistor is an electrostatic-sensitive device. Please handle with caution. 1 2 3 1 2009-07-17 TPC6110 Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Drain cut-off current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-on time Switching time Fall time Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge 1 Gate-drain ("miller") charge tf toff Qg Qgs1 Qgd Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) |Yfs| Ciss Crss Coss tr ton 0V VGS -10 V 4.7 ID = -2.2 A VOUT RL = 6.8 VDS = -10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 20 V, VDS = 0 V VDS = -30 V, VGS = 0 V ID = -10 mA, VGS = 0 V ID = -10 mA, VGS = 10 V VDS = -10 V, ID = -0.1 mA VGS = -4.5 V, ID = -2.2 A VGS = -10 V, ID = -2.2 A VDS = -10 V, ID = -2.2 A (Note 7) Min -30 -21 -0.8 4.2 VDD -24 V, VGS = -10 V, ID = -4.5 A Typ. 59 43 8.4 510 85 110 6 12 21 70 14 1.6 3.8 Max 100 -10 -2.0 77 56 ns nC pF Unit nA A V V m S VDD -15 V Duty 1%, tw = 10 s Source-Drain Ratings and Characteristics (Ta = 25C) Characteristics Drain reverse current Pulse (Note 1) Symbol IDRP VDSF Test Condition -- IDR = -4.5 A, VGS = 0 V Min -- -- Typ. -- -- Max -18 1.2 Unit A V Forward voltage (diode) Note 7: VDSX mode (the application of a plus voltage between gate and source) may cause decrease in maximum rating of drain-source voltage. 2 2009-07-17 TPC6110 Marking (Note 5) Lot code (month) Lot No. Part No. (or abbreviation code) S3K Product-specific code Lot code (year) Note 6 Pin #1 Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: (a) Device mounted on a glass-epoxy board (a) (t = 5 s) (b) Device mounted on a glass-epoxy board (b) (t = 5 s) FR-4 25.4 x 25.4 x 0.8 Unit: (mm) FR-4 25.4 x 25.4 x 0.8 Unit: (mm) (a) (b) Note 3: VDD = -24 V, Tch = 25C (initial), L = 0.5 mH, RG = 25 , IAR = -2.3 A Note 4: Repetitive rating : pulse width limited by maximum channel temperature Note 5: * on lower left of the marking indicates Pin 1. Note 6: A dot marking for identifying the indication of product Labels. Without a dot: [[Pb]]/INCLUDES > MCV With a dot: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 3 2009-07-17 TPC6110 ID - VDS -5 -10 -4 -3.5 -4.5 -5 -6 -8 -3 -2.6 -2 -2.4 -1 VGS = -2.2 V 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -3 Common source Ta = 25C Pulse Test -10 -10 -3.5 -4 -8 ID - VDS -3 -4 (A) (A) -2.8 -4.5 Common source Ta = 25C Pulse Test -2.8 ID ID Drain current -6 Drain current -4 -2.6 -2 -2.4 VGS = -2.2 V 0 0 -1 -2 -3 -4 -5 Drain-source voltage VDS (V) Drain-source voltage VDS (V) -10 ID - VGS Common source VDS = -10 V Pulse Test 100 Ta = -55C 25 -1 VDS - VGS Common source Ta = 25C Pulse Test -8 (V) VDS Drain-source voltage -0.8 ID (A) -6 -0.6 Drain current -4 -0.4 ID = -4.5 A -0.2 -1.1 -2.2 -2 0 0 -1 -2 -3 -4 -5 0 0 -2 -4 -6 -8 -10 Gate-source voltage VGS (V) Gate-source voltage VGS (V) |Yfs| - ID 100 Common source VDS = -10 V Pulse Test Ta = -55C 10 100 25 1000 RDS (ON) - ID Common source Ta = 25C Pulse Test Forward transfer admittance Yfs (S) Drain-source ON resistance RDS (ON) (m) 100 VGS = -4.5 V -10 1 10 0.1 -0. 1 -1 -10 -100 1 -0.1 -1 -10 -100 Drain current ID (A) Drain current ID (A) 4 2009-07-17 TPC6110 RDS (ON) - Ta 120 Common source Pulse Test -100 Common source Ta = 25C Pulse Test -10 -10 IDR - VDS Drain reverse current IDR (A) Drain-source ON-resistance RDS (ON) ( ) 90 ID = -1.1, -2.2, -4.5 A -4.5 -3 60 VGS = -4.5 V ID = -1.1, -2.2, -4.5 A -1 -1 VGS = 0 V 30 VGS = -10 V 0 -80 -40 0 40 80 120 160 -0.1 0 0.4 0.8 1.2 1.6 Ambient temperature Ta (C) Drain-source voltage VDS (V) Capacitance - VDS 10000 Common source VGS = 0 V f = 1 MHz Ta = 25C -2.0 Vth - Ta -1.6 (pF) 1000 Ciss Gate threshold voltage Vth (V) Capacitance C -1.2 100 Coss Crss -0.8 Common source -0.4 VDS = -10 V ID = -0.1mA Pulse test 0 -80 -40 0 40 Common source VGS = -10 V ID = -0.1 mA Pulse Test 80 120 160 10 -0.1 -1 -10 -100 Drain-source voltage VDS (V) Ambient temperature Ta (C) PD - Ta 2.5 (1) t = 5s 2.0 (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) -30 Dynamic input / output characteristics -30 Common source ID = -4.5 A Ta = 25C -25 Pulse Test -20 (V) Drain power dissipation PD (W) -20 Drain-source voltage -15 -12 -10 -6 -5 -6 -12 VGS -15 1.0 (2) t = 5s 0.5 -10 VDD = -24 V -5 0 0 40 80 120 160 0 0 4 8 12 16 20 0 Ambient temperature Ta (C) Total gate charge Qg (nC) 5 2009-07-17 Gate-source voltage 1.5 VGS (V) -25 VDS = -24 V VDS TPC6110 rth - tw 1000 Device mounted on a glass-epoxy board (b) (Note 2b) Transient thermal impedance rth (C/W) 100 Device mounted on a glass-epoxy board (a) (Note 2a) 10 1 SINGLE PULSE 0.1 1m 10m 100m 1 10 100 1000 Pulse width tw (s) Safe Operating Area -100 ID max (pulse) * (A) -10 10 ms * 1 ms * Drain current ID -1 Single pulse Ta=25 VDSS max -10 -100 Curves must be derated linearly with increase in temperature. -0.1 -0.1 -1 Drain-source voltage VDS (V) 6 2009-07-17 TPC6110 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2009-07-17 |
Price & Availability of TPC6110
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |